The UK's biggest automatic scooter forum.
Separate names with a comma.
thanks dude means alot :D
i replied too in other thread thingy... might be the coil/cdi pack.
might be the coil/cdi pack.
I bought one of those cheap DMP copy air boxes, and a new inlet rubber. The inlet hole seems to have a restrictor built into it [IMG] [IMG]...
My yasuni had 2 restrictors in it when i bought it, one in the front of the pipe like you have removed, and also one in the tail pipe. so worth...
To kill the furlough blues being stuck at home on lock down, I decided to enter the deepest depths of my shed, where no man has ventured since...
normally the middle clip position on the slide will be right to start off with. the needle position will affect the mid throttle position...
its quite possible to have the idle mixture set too lean (stalling with the choke off) and the main jet too rich (but still fouling plugs whilst...
Thats the spirit :)
glad you got it sorted Thats one that i doubt anyone would of thought of suggesting. with all the changes you had made i was certain it was going...
As your looking at the bike head on, the left side should be on for Dip beam and the right should be on for High beam.
pulled my mid race 70cc out of my shed the other day, it looked like a barn find. it hasnt been on the road since 2012... is it even seized ?...
welcome :)
I have never derestricted a speedfight3, but I have heard the washer is in the front of the exhaust, and is quite far down (a pig to remove). you...
yes it will be restricted to 30mph. for definite there is a restrictor in the exhaust pipe and the variator, and the cdi may be retricted too....
when you have the transmission case off changing the clutch springs, it would be worth also checking for flatted rollers, general variator...
plenty of zip pipes about, but you may have to modify a zip pipe to fit the vespa bodywork. maybe try and pick up a 2nd hand zip pipe off e-bay,...
yes that will be fine... looks a good quality fully synthetic oil.
you would have to do a bit of research and find out what jet is fitted to your carb as standard, and then check inside your carb to see what is...
My scoot hasnt got a tank either, I pre mix. its quite easy to pre mix if you can find a little jug or a small bottle with ML increments on the...
