The UK's biggest automatic scooter forum.
Separate names with a comma.
Ive used synthetic, semi-synthetic and even old type mineral oil and never had a problem Most forums say you can basically use any engine oil in a...
Well ran with 50cc carb but still wanted to use 125cc carb Great news Finally got it sorted After a lot of stripping carb many times found that...
You can check the output from the stator without removing the flywheel. Find on the fan side of engine there should be a cable to a plug Your need...
Your welcome. Might pay you to get a new ignition switch as you have to play around to get power, and when riding you hit a bump and the scoot...
I use a piece of wood under the rear wheel to get the same height as front wheel off ground on center stand. When off stand you have to try and...
You need to check battery voltage with multi-meter at least 11 volts DC If ok check at ignition switch for same voltage, but could be 0.2...
Most Yamaha,s, the black is an earth (negative) and by the photo that is right for the choke, but the other choke wire seems to be wired correct,...
You may have a problem as it probably is for starting from cold If the scoot has a normal carb with electric choke would think it's for that. If...
Ah ok
Could have been a corroded plug,and now pushed together may be making better contact. On my scoot I use battery terminal spray grease in all the...
Are the disc,s or brake drums a little rusty as this will cause the brakes to grab hard?
I agree with all here Keep up with maintenance and it will last a long time I have a car but this winter gone I used my scoot Just need...
It is a simple system but if you have a multi-meter it can help to check wiring i suspect a wiring issue as you have replaced all ignition parts...
If you remove the earth from the CDI unit you may find no spark as needs to earth The kill switch and side stand break the earth so to stop the...
Glad to see you found the problem
I had a scooter that had stood for quite a few years and had same problem Found out the whole of earth wire had corroded from battery everywhere...
It is a cold start control unit Has 2 wires looks like regulator but they have 4 wires 5RNH57410000 Yamaha part number Ebay...
That to me sounds like you have a badly corroded connection or wire if corroded it makes a resistance in the wire so using a battery charger...
I reckon a loose wire or maybe as you squirt fuel in the intake and it starts and runs, maybe could it be electrical, not charging enough to run...
I found this on a scooter website but does no show a cable but it has an ABS unit, but shows all the parts for the braking system, 2016 year model...
