The UK's biggest automatic scooter forum.
Separate names with a comma.
Can't see carb that well but in general the fuel will be the largest brass pipe fitting and smaller one will be vacuum for fuel tap Both rubber...
Not advisable to use As for off road click link for there website for scooter 2t oils...
The belt should not be loose, but not very tight Maybe a seized variator or rear pulley If you take the spark plug out you should be able to turn...
I agree I used back to black,just spread around but don't buff off.
If the battery voltage is to low and drops more when other items are switched on that will effect a relay. That could be right voltage if it has...
Ok well trying to sort out for a friend He got this a few months ago and was having trouble with carb flooding but sorted that He took it out and...
You can build yourself if you have a large enough socket between 30-40mm, sorry can't remember exact size and there are videos on You Tube to show...
yes sorry I goofed up ...........Sorry
clutch bell...
if the clutch shoes are ok you will not have to change clutch so that will drop cost I did not take a note of where found parts so will look again...
I looked on my old neos 50cc engine , and the engine number is on the belt casing behind the rear shock lower mounting, but only number no type I...
My 125cc takes the 140mm clutch and as far as I know there are only 2 sizes made, one for 50cc and 1 for 100cc upwards That's why need engine type...
BE CAREFUL That 112mm is a 50cc clutch NOT 100cc, these are around 140mm As said need measurements As said maybe another type of engine will fit...
Maybe because it is french need that engine type as other type of engines may fit Could be the same as a 125cc engine, but need type of engine and...
So same as Yamaha Neos Most parts do inter change as both the same That photo is a 2003 Neos
Yeah will look good then Does it look like this scoot? [IMG] [ATTACH]
Welcome I had my first moped back in 1974 and that was a Puch Maxi same color as this one, and year, but without side leg panels [IMG]
It needs to be right if going to ride or sell
by the rust on the back pulley,maybe the belt was rusted to the pulley, can happen, so would not turn engine over. yes, to do rear brakes, exhaust...
I flush with brake cleaner You can get from most motor factors, a small can Just leave nipples open to drain over night as it evaporates quite...
