The UK's biggest automatic scooter forum.
Separate names with a comma.
Yup. Poor jetting - misfiring. Try the needle. Takes five minutes. If you upjet and nothing works - you get the same symptoms - then ask your...
The dangerous part is the scoot is too poor and that is why it's getting hot. I cannot say what will happen if you keep riding it.
Hi It's possible it's a bit poor with the open filter. I bet you that if you put a slightly bigger main jet in there - it will behave. To test...
No. I really don't think it is. Keep the airbox on there and give him the filter you intend to use.
Dandruff - Keep an eye on the plug when you put the 'R' on. You might need to upjet a smidjun. And get ready to go rather quickly. I put the...
Ah - so you didn't strip/remove the crank ? OK - forget that then. I misunderstood. Just re-do the intake manifold & the cylinder - but with...
Nevermind -
Some propper sealant ! If I were you I would drop the engine off the frame, remove the ignition, put a cap with a bit of inner tube on the exhaust...
Ok - you should be OK with the rollers then. Get a box of jets. It's a darn sight cheaper than a new Kit. And if I were you I would get a new...
Hi side to side play in the con rod is not a problem. The rod should not have much diagonal play though - and certainly not any front-to-back...
Rob, you are undoubtedly the bravest man I have ever seen. You could try poking a magnetic stalk around in the engine to find that clip. If it...
Lastly, a question. What was your old pipe ? I don't know what kit you're running (70?) but when your scoot starts running right - if you've just...
I have always liked the wheels on SR's.
No - you're only interested in the main jet. So you might have to remove some fairing to get at it. Do that, then : Remove the filter (it will get...
You have to understand that as one mechanic once said - all engines are liquid cooled - and the liquid doing the cooling is petrol. Without...
I'd buy a box of jets from 100 to 130 and start with the biggest and work down by fives until it runs. Then go up or down by twos to get a nice...
you're lucky you didn't seize the engine. What fuckwit 'mechanic' gave you that advice? I have a non standard airbox with a 22 mm intake hole....
The C 20 is the only one I do not have. Any and all exhausts do this. But you can strip & polish them like chrome at any point. Even when they are...
Hi I have quite a few Yasuni exhausts and they all do this. It's the varnish. There isn't much you can do except remove the varnish with paint...
i'd like to adapt some SL Tech rear body plastic to the 'vetto:...
