The UK's biggest automatic scooter forum.
Separate names with a comma.
Right. i have no idea about that one because it's kind of neither fully open or fully closed. Assuming you have no air leak gremlins, your scoot,...
Ok i looked at your video again and i can't tell for sure what you are using as a filter. is it or is it not a red foam open filter?
stop stop. These problems began when you put a new crank in and rebuilt the engine ?
just looked at your video again. That's a stock-ish airbox with a malossi filter. you can ignore all my previous advice on jetting. But the fact...
That will not solve what I just heard on your video.
I suspect that your problem lies with the transmission. if you're running an open filter with a 21 mm carb then you are looking at anything...
Well it's too poor now and that's a fact. Just because it doesn't move does not mean it's too rich. What weight in rollers are you running ?
Go 115 . maybe more.
Possibly. Are you running the open filter?
Too poor. No question. Go 110.
i'd go with dellorto 17.5 or 21 mm. Anything else is trouble.
I assure you you don't want an auto choke. All carbs blow back to a degree- but if it's hard to start and it's doing it a lot, you might have a...
Hi I'd get rid of that 'orrible filter and put a propper air box on there. Then remove the carb and give it a complete strip/rebuild paying...
Hi When you say 'de-restricted' - what do you mean ? Ring out of the variator or actual exhaust mods? Is the scooter struggling to rev or is it...
Right - I have some embarrassing news. You may remember that the Del Orto (or not) carb I got (new) flatly refused to get rich to the point where...
Just sanded, de-greased & sprayed the Typhoon exhaust with heat-proof paint. Dried it with a paint-stripper. The only thing left to do is figure...
i dunno about brgil but the gf scoot is running a squitch of 1.16 which pretty much rules out detonation problems with 95 octane. Got rid of...
Right - just had the exhaust off the engine, blocked the cylinder exhaust port with a plate and a bit of inner tube (I have this made up for just...
Well I just tried something - I loosened the cap on the petrol tank when I took it for a spin. This should stop a vacuum forming in the tank which...
Excellent link Merl - The torque curve on the 16 is also broadly higher than the others from 5000 to 8500 which means it will be far easier to set...
