The UK's biggest automatic scooter forum.
Separate names with a comma.
nice new DO 21 !
The oil feed will not necessarily be there on a stock OKO. I had to drill and tap a hole and screw in a brass nipple. You might have to do the...
Just cleaned the carb & put new fuel lines on GF's scoot. Took it for a test. It's pretty damned fast ! Difficult to say how fast in fact -...
It was shortly after this that I got on a GPz 305 and rode it from Cambridge to Paris with it's very attractive blonde owner (neither of us had...
errm- just kicked it and not only did it start, it nearly blew a hole in the garage door! Woohahh! Full report tomorrow - but I got what I wanted...
i just got a spark out of the Doppler dd. I am stoked. now it´s just a quastion of ergonomics.
good work guys. good work. wjust spent an amusing week preparing the terrain for the Doppler DD for my gf's scoot. Everything is now ready. So I'm...
aha! problem solved!
No more visits to the supermarket !
Hi folks - If you have a Doppler internal Rotor ignition for Aerox/Nitro/Ovetto/Neos/Booster etc AFTER 2003 (with catalyser) I want t know the...
Two sets of different weights, three of each of the same type -arranged correctly, do not hurt a variator. Trust me on this.
There is only one reason why the carb would piss petrol everywhere and it's the needle valve. When you suck through the petrol intake tube and...
Hi check floats/needle valve. If the floats are holed and sunk or there is crud in the needle valve seat - that would do it -
Nooo ! Not two different sizes - two different weights ! Six ten gram weights gives to 60 g total. Six 9 gram weights gives you 54 g - That's six...
Just checking ! It's the diffusor. Together with the needle it determines how much fuel gets past the needle. The top of the tube pokes out into...
A couple of ideas that jump out at me: If you are using the same air box on the scoot then the Jet you need for the PWK is not going to be...
is it a small tube made of brass with little holes in the side?
madness! be careful with stones/steps. the ovetto is pretty low and the first thing that hits is the exhaust just under the cylinder. i have seen...
if the scoot is standard then you shouldńt have too much trouble finding the right set up - but that´s not the same as saying you'll get it right...
How big is the intake in mm on the stock box? If I was you I would set the air screw unturned one turn from closed, set the needle to it's lowest...
