The UK's biggest automatic scooter forum.
Separate names with a comma.
yeah. Roberts radio in the garage. Some tools I would not be without: my compressor & impact wrench Clutch spanners for taking apart the rear...
OMG!
Hi the answer is both. Remove it. I assume you have removed the restrictor at the manifold. Good. Now take the can apart and do the same to the...
Nice line up !
Hi the clutch is tricky without sitting on the scoot. For the air screw you should try tightening it up completely then opening it up 1 and a...
thanks guys. this guy was the inspiration: Very popular on the continent. http://polisseur.skyrock.com/24.html Should be some bits in there you...
Yup. Same wheels. got 'em second hand. I started off stripping them. Then I sanded them dry with every grade from 240 to 400. Then i sanded them...
You're gonna need successive applications of stripper - and I'd rough them up a bit with sandpaper to take the shine off the paint - it'll help...
Aprilia wheels are a mother to strip. And I know whereof I speak....... Good luck and don't give up.
Yeah - Gemma's right. Get the paint stripper gun on it and heat it for ten minutes on full power moving the gun around the case. Then use a tap &...
You can have sex on an scooter (if it's an Ovetto - it has a big seat) - but it's easier in an Astra estate.......:rolleyes: I much prefer using...
Better......http://www.flickr.com/photos/116877957@N08/12766183153/ :p
Blimey. Complicated casting with the auxiliary exhaust ports. Propper swiss cheese. Is that a power valve on there as well ?
You might try closing the air screw a bit (which should make the revs higher when it's warm - if I have understood anything) and then re-setting...
Shock resprayed & ready to go on the Typhoon. http://www.flickr.com/photos/116877957@N08/12797518194/...
Just put it on. Make sure it's in the groove so it doesn't get pinched when you tighten the bowl up. This is one of those rare occasions where...
Nothing wrong with the Mina AM6 engine apart from the plastic gear shifter thing inside the box. This can be replaced with a steel version when it...
http://www.wired.com/autopia/2014/02/hennessey-fastest-production-car/ Going to have to look into an MHR big-bore now. My scoot is no longer the...
Really you shouldn't attempt any carburettor adjustment until the motor is up to temp. Chokes (especialy auto chokes) are rubbish - and their job...
