The UK's biggest automatic scooter forum.
Separate names with a comma.
Electrics suck. the only advice I can give is to start from first principles and seek the earths. Don't forget that they need a good metal/metal...
whoaar. That's a bit of alright. So what's the program? Porting, custom exhaust, slick tyres and some Renthals? Me likee!
Are you joking or what the hell is going on over there!
photos please!
Sorry- I'm not even in the same country. Pedparts? For the rollers, weigh them accurately and then figure out what you need to reduce the overall...
i really enjoyed the one with Anthony Hopkins (the Fastest Indian?) - but i can't condone drinking water from a foundry well used for cooling...
no worries. make sure you actually unbolt everything and give everyindividual contact surface a good tush. If you found one in bad nick - it's a...
Hi the draining battery might be a clue. If you get your coil & CDI and it makes no difference have a good look at the scoot and find out where...
hi I would have the cylinder off and have a look at the piston. Get a new one, give the cylinder a hone and chamfer the ports- put a Yasuni Z on...
lookin' mighty good there- c'ept for the bench - but I'm in no position to say anything about the state of benches right now.....
Interesting. Maybe they modded your depression pump for you...... Photos ? And danger. if your carb depression hole is open- it- s going to lean...
Hi My advice would be to get the front brake system from a Rox and put it on your Typhie. Lever and hose. That business with the cable actioning...
Right. Just put a 108 in the carb, a stiffer spring in the rear end, stiffened up the clutch, swapped the Malossi big roller variator out and put...
Hi if you've tried a different coil first, have you tried a new cdi ? Have you got a good solid earth connection from the stator to the frame? One...
Hi Which gaskets? Do you have a spark ? is everything connected (carb- wise) properly? Sometimes after a rebuild they can be a bit reluctant to...
The little ones are for spacing the variator properly for wider belts. The big one is the restrictor - put it in a drawer and forget about it. You...
Well I gave the C 16 a tush last night and put it on. Removed the silencer - took it apart and then cleaned the perforated tube (it was no longer...
If the little half moon wedge was in the crank when the ignition bell went on (can someone please tell me the english word for this !) it can't...
With a Piaggio I would have thought the stock crank would take anything you could throw at it. But I would replace the needle cage in the little...
http://www.pedparts.co.uk/blog/sports-exhaust-testing-50cc-and-70cc-sports-mopeds-part-one have a look/ read here. i only have yasunis here. but...
