The UK's biggest automatic scooter forum.
Separate names with a comma.
i fitted the all in one rear light and indys on my aerox which looked great! never did sort the voltage out so they just flashed fast lol
it wont rev high as the standard engine isnt ported to rev high, i dont think the stock cdi is retarded in any way so i wouldnt change it...
what sort of speed do you expect from a 125 standard air cooled engine? with no real bolt on power parts 60 isnt that far off its top speed id...
did you.... replace the piston rings correctly in the piston lined up with the piston dowls fit new head o ring and gaskets tighten all bolts...
thats the shoes catching, where they the correct shoes? they sound too big hence rubbing on the bell. only other thing is to gently sand down...
not 100% sure possibly wiring loom if its different, cdi, engine radiator, panel, coolant pipes,
cooling wise, the runner shoud be perfectly fine stock, just make sure you use proper coolant mixed with deinoised water not tap water. when...
some 50 4 strokes can be made full power, i know piaggio told us when buying a scoot for my bro that the 4 strokes can also be made full power,...
better to go liquid cooled for big power, or a low end 70 will be fine air cooled. as said you will need a radiator etc for a lc conversion and...
Hi im looking for some advice on smoothing off the front panels where the indicators are fitted. reason being is both my front panels have the...
i have polished mine and it dosent go horrible at all fast. infact mines been done a year and other then a polish now and then it looks cracking...
what about my tdr pipe, should fit like a pm55 and is claimed to outperform the pm 59!
Included is exactly what you see. i have no history on the head as it came from a friends garage but it looks clean and tidy and could well be of...
Up for grabs is a 2 stroke 125 top end from my engine after i 172'd it the kit had covered 8000 miles total with no mods so was run as stock for...
£160 anyone?
doesnt sound like its grounded/earthed properly?
yer buy cheap buy twice.......or more in your case lol the 25mm is what i have an its lovely. runs smooth and with plenty or power throughout...
sounds more like dodgy cranks or poor fitting, my bikes on a stock crank and lifts up most the time. so far so good on the crank after 1000 miles...
as said the port timing need adjusting to make the 183 run correctly, and id imagine some case flowing wouldn't go a miss
if an impact gun isnt doing it maybe its been damaged or welded on? mine had never been removed in its life by the looks of it but it soon came...
