The UK's biggest automatic scooter forum.
Separate names with a comma.
written good english me like long time maybe buy with pocket monies
how does it run with the airfilter fitted like it is? i tried using the original elbow from the original airfliter with the open filter on the...
problem is who has owned them all or a few to give a side by side comparison? i have owned the stock pipe and the tdr. the tdr performed very...
theres no real lighter is better or heavier is better. find the right weight for your set up. the bike will have a certain range in the rpms where...
every time i have this its a fuel tube leaking at the end. ussualy by the carb. check all the fuel lines and if you have them stick some small...
let us know how the gear up kit goes
have the tires been balanced? vibrations could be due to a buckled/dented wheel worn engine mount bushes worn swing arm bushs or the bushs can...
i had an aerox at 16 was new and the shop derestricted it after the first service. used to go off the clocks with the full derestriction done....
100cc 2 strokes arent quick bud, i spent a lot on pipe/roller and such on my aerox 100. i fitted 5gr rollers in the end to get it too shift with...
couldnt say for sure, but generally the bushs are to blaim for engine movemtn side to side. the silent block should just be for dampening...
no one said it was on? someone mentioned to check that it was off
nope, as that compression isnt a fueling issue. take the reeds out and look at them, simply undo the 2 bolts on the carb inlet and pull it off...
that sounds mega low im sure its 120 ish for decent compression. as for the description my runner 172 did the same but would start after the...
i have them fitted and havent found any issues at all.
i myself tried findng such an item, but sadly all that came up was go kart airfilters and modding air filters from other bikes. i considered...
my rs sparks when you touch the neg, not sure if its becasue i touched the frame or not but batteries do arc when making a circuit, just use a...
if the shops not far take it back, its why you buy new!
who the hell counts? 1-2 seconds? lol peds are fast, my 172 is quick. but i dont reckon its in super bike territory
wouldnt have a clue, but to strip pulleys either means your buying used worn pulleys or the cranks worn and is quickly slipping inside the pulleys...
gilera spares do them i think, as do scooter centre in germany however if its stripping them out id imagine the crank splines are pretty worn. a...