The UK's biggest automatic scooter forum.
Separate names with a comma.
Should be good !
New needle valve with the new floats ? Hmm. Still got the old valve ?
Get a washer on the variator ! Like the vid .
A bubble in the fuel line. Do you have clear tubes?
Try Malossi. I do not live in the uk. sorry
It's the screw that's flush/almost flush with the body of the carb. Not the one with the spring on that controls the idle. The Mixture screw...
It is good - and the power is equal to that of the Yas 'R'. But not the C 16 More importantly, the 'R' has a much flatter torque curve and this...
I can photograph the difference. It's not subtle. The steel that the springs are made of is visibly thicker. The blue springs are the stiffest if...
Looking at the photos - I don't think you've got the right belt. It looks too short to me. Have you compared the new/old one side by side ? What...
Get hacking ! Good luck.
You shouldn't - really. I don't know what else to suggest !
Loose electrical connection ? Some shit in the carb ? Stopcock valve on the tank playing up and not letting enough fuel through ? Sticky needle...
You jammy b#@tard !
Quite possibly. Or it's possible that your bell is too small for the clutch and it's contacting too soon. What brand of clutch is it ? Polini ?...
It's got to be the clutch - not stiff enough and / or the mixture screw and possibly that the variator needs a washer (like in the video). But you...
Not all variators/sliders are the same. My Doplller SB2R came with two of different widths and I have aquired more since because I use belts for a...
Have a play with you transmission (clutch, variator) and your richness screw.
I would start with the actual ignition barrel (where you put the key in). There are wires coming out of it. When the switchgear in the barrel goes...
Then just trust me. ;)
I would suggest three avenues : first- the mixture screw. It affects the first stages of acceleration. Try riching it up by closing it one quarter...
