The UK's biggest automatic scooter forum.
Separate names with a comma.
Thanks for the advice accy, are the zip 50's and 125's variator tools the same? I can go borrow a 50s one, saves me buying one:)
I am not sure I know how to be honest when I've had a problem with a past ride I have just got rid but the with the 125 zip knowing how hard they...
Had it around 8 months or so now, rode it for a few days, went to fit an alarm and noticed how hacked and chopped up the loom was so didn't...
Thanks for the advice accy, just noticed there is some vibration noise or such coming from the crank casing, mostly just around the engine oil dip...
I have all of that now, well on order at least, now I am having bogging problems :( And yes I guess I did ask a good few questions, better to...
I've not actually removed the exhaust as of yet was just buying everything needed to restore the exhaust
Hey guys, My Zip 125 recently started bogging on full throttle, its not real bad but its bogging and only just started doing this, I was...
Well, Ordered the 125 gasket :p Now the ped seems to be bogging on full throttle/40mph+, oh the joys. Edit: People say most likely a dirty air...
There is this, but I don't quite understand the 125's 125: Gasket Size: O.D 66.5 X ID 44 X Depth 1mm 50's : inner diameter of the hole is apox...
Well, I planned to take the ped to the store to get the bits :( I was looking on eBay at the gaskets and bolts, they looks very much the same to...
Thanks Gemma, been a great help. Got everything expect the lacquer now, I have another question :eek: Should I buy new exhaust gasket and bolts...
Thanks again, what kind of lacquer should I get? Going to go to the store and pick up Jenolite & PJ1 high temp paint, is there any other paint...
What do you think of these to paint the exhaust?...
Yeah the white bottle is non-drip, the white is just cheaper for some reason on eBay they look exactly the same just white bottle. White:...
Thanks Gemma, I am going to buy the Jenolite tomorrow. Is there any difference in the black and white colored bottles?
Here is a few pictures while its on the ped [IMG] [IMG] [IMG] After a quick little brush with a wire brush [IMG] [IMG] [IMG] [IMG]...
So do you recommend sanding then acid etch primer it, then spray with high temp?
Will do, forgot to take pictures today so hopefully will get some up which can show the extent of the rust.
Well just rubbing your finger across the exhaust brings off a lot so I thought sanding it may make the metal so thin it might start blowing...
That is a real good idea, would of never thought of that really, bet it will save a few quid too :)
