The UK's biggest automatic scooter forum.
Separate names with a comma.
warm the surrounding casing then use a long bit of alloy bar and drift it out from the other side. You can usually feel a very small lip to hit...
cant beat the smell of castrol R.....
http://www.scootershack.co.uk/threads/engine-casing-polish.29879/#post-291205
bung end with a potato. if you use warm water it'll react quicker. Remove wadding from end can but leave baffles in as they too need cleaning...
angle grinder if you have access to one firstly cut 2 slots in the outer race almost all the way through. Then smack the bit out with a cold...
Mr sheen for panels...used it for years without any issues Astonish stainless cleaner is great for stainless. Try not you use washing up liquid...
the pins locate in the recess in the front of the bell and the length of the handle rests against the floor. This will allow you to slacken the...
I have a few over at my place...feel free to DL http://www.exup1000.co.uk/tech/misc/index.html
There probably is somewhere Believe it or not theres loads of folk at our work place who dont know how to change a bulb...and I dont just mean the...
Thats probably what was siad 30 years ago. Fair weather riders as you call them are no different to the rest of the bikers. i only ride mine in...
not on a 2 stroke as theres too much oil in the smoke thats expelled through the pipe. It coats the inside of the pipe and stops it rotting from...
If you've used car paint from somewhere like Halfords for the base coat, use their laquer and you'll know it wont react with the base its its...
I bought these :cool: http://www.screwfix.com/p/laser-box-spanner-set-8pcs/46100
depends on what its on... Do you have a spare key? if the barrel is side mounted like a ped, you could take the electrical switch off the back...
can you not get a length of flat bar between the 2 lugs on the end and lever it around?
