The UK's biggest automatic scooter forum.
Separate names with a comma.
I have a 2002 Neos and it has a starter relay, maybe that ? Mine is under the battery cover a few inches back from the battery clipped to the...
Mostly m6,m8 I just looked for same in stainless size, length
When I rebuilt my 2 scooter's I used copper grease and replaced most screws and bolts with stainless ones Bolt World on Ebay is who I used as good...
Hello, not been on here for a while I got a new carb for my GY6 125cc and I am puzzled what the extra hole is for (see photo). Have searched...
I would think it should have a cover on both sides From the bearing number on the diagram above I have found the one for the UK and it can have...
Any numbers will be of help If yamaha they have a number near the rear shock absorber bracket as well PM me the info, but wont be on till this...
ok
Looks the same as my scoot I would think it would be a metric thread Measure the diameter and that is the thread EG: 4mm M4,2mm M2 and get a brass...
I have used a silicon based sealant and no problems with that...
Thanks Marsh and Stevep will give both a go and check This scoot has a 82cc BB kit on it with A9 cam What valve clearance would you recommend ?
My chinky scoot has a problem and driving me mad I know chinky scoots are bad This scoot has been running very well for use to work, but last week...
You need a multi-meter set to lowest ohms and put one lead on engine and one to negative battery and some multi-meters read 000 or they bleep....
The red/black wire as you said is cdi feed and only generates power when engine spinning If side stand fitted that has to be up as this kills the...