The UK's biggest automatic scooter forum.
Separate names with a comma.
Hi, The electric starter is not used at all so I would like to remove all the parts from the bike. The starter clutch rattles and does my...
Hey all, Just wondering if it is possible to do a bar conversion on a Neos 50? The only reason i ask as i have seen limited info and no...
Great stuff! Can't wait to get cracking and get this thing behaving again! The jet that comes with the carb is at the top of the range of the...
Hello, Recently I have been having a hard time getting my stock gurtner 12mm carb running nicely. It was working perfectly and over time has...
Hi, Crank bearing or wee end bearing? I'm pretty certain you need to buy the bearings and seals kit for the crank.
Hi, Used your advice. I wrapped the ptfe around the stub, pushed the bung back on, then tightened a cable tie around it to keep it tight! cheers
Hi Got the road test done... It was running fine last night, today it's way to rich. Was sputtery as if the choke was still on. Turned the...
Hi, Just wondering what the opinion is of the forum on blanking off the unused stubs on the carb and manifold. The manifold came with wee...
Hi, Hi, sorry for the delay, had a busy week! :) Since adjusting the idle, the bike has been running well apart from a sputter on accelerating...
Hey! Sorry for taking a while to get back. Since my last post i have turned the idle down a 1/4 turn. This seems to have fixed the over revving...
Hi, Quick update, i have put a new cylinder on my neos, along with new reed block, manifold and new stock air filter. I'm finding that after a...
