The UK's biggest automatic scooter forum.
Separate names with a comma.
Just curious what needle people have found suit scoots the best. I did a fair few trials with various needle set ups on my FXR180 and eventually...
Hi everyone, I'm after a bit of advice on fine tuning my FXR180 which I use as a communter. I have a 28mm PWK rigged up with...
Hi guys, I put a 28mm PWK on my Runner 180. No other mods really on this bike. Rigged it up to the std airbox with the use of flexible...
I hear you. I was thinking of going down lower with the main jets but when I got down to 128 I found that the revs were hanging badly. I have the...
Thanks for the input. The airbox connection is 40mm. The carb connection is 50mm. I did try without the main in right at the beginning and it was...
Standard 180 airbox with standard element.
Today I tried a 128 jet and various clip positions on the needle but the problem still remains - dying at about 1/2vthrottle. Has anyone found the...
My problem is that I thought that you should sort out the main jet first but I can't even get close to 3/4 throttle. I read somewhere that...
Trying to set up my BGM Pro PWK carb on a 180 2t. It is a Powerjet version but I have blocked off the powerjet pipe while I am tuning it. The...
I recently put Malossi green springs in the standard clutch on my FXR180 2t. I gave the bell and clutch a sand with some fine sandpaper at the...
If you are trying to start the bike with the trans cover off, the bendix will jam against the outer pulley as it needs to be supported by the...