The UK's biggest automatic scooter forum.
Separate names with a comma.
Oh I wasn't aware, I figured parts like HT leads, belts/chains and air intakes would be affected by pressure washers.
I'm not sure that pressure washing bikes is any good, I always heard it's really bad to use a pressure washer on anything on 2 wheels as...
Spitfire is ok, bit light and fruity though, I like darker ales, Hobgoblin, McEwans, Bishops Finger, and a few others.
That's a shame, this time of year is ale time!
Traditional English ale! I hold a pint of Bishops Finger up to the Chinese.
They can be found cheaper on ebay if you have time to order and wait.
In that case, see if you can remove the front panel and remove one of the bulbs, and look at what type of bulb it is, it's usually stamped in...
If neither the dipped or high beam work at all, the only way to tell is to remove the bulbs and see if they have 1 or 2 filaments inside. If they...
It depends on the scooter model, some have twin dipped/high beam, some have one high, one dipped, do you have a switch on the dash to switch...
Take a look at removing your front panel as I mentioned, there should be a number of screws which hold the front panel to the steering column...
I did a quick search and nothing comes up for the model you described, but I found a Pulse lightspeed, is that your model? I assume you need to...
Probably listening to metalcore.
it's a 125cc 4 stroke Chinese scooter
I've not been here that long but it seems to be busy and quiet at different times, I guess with the summer now over people tend to hold off on...
Well I've been slowly re-building it over the summer but still needs a fair amount of funds to get on the road. Was hoping to get it sorted by now...
