The UK's biggest automatic scooter forum.
Separate names with a comma.
Cuki, you've already been told you'd need basically a 2 stroke expert tuner to do the port correction if you use a long stroke crank. That is a...
Yeah, I'm reckoning that's the problem Pain in the ass to set it up to tick over too, but also if it's burning off all the oil it wont be running...
Drive belt?
So I just rebuilt my Piaggio typhoon with a 172 kit, 25mm carb, scorpion, other tuning parts. 45 idle jet, 105 main, AQ266, D24 needle (Top clip)....
Marsh, on the inside of your 13inch runner wheel, does it say 13x3.50? I take it you have a 2 stroke runner wheel?
That breather hole needs covering. it's used as a vacuum basically but if its not sealed then its sucking in too much air.
Re: Yamaha Vino engine swap - VX 200, Typhoon 172, Grand Axi the old Typhoon 125s are 2 stroke, the 172 kits you would have read about are for...
Engine mounts need replacing would be the obvious. I don't know the ins and outs of a VX so can't comment on if it has a type of cradle. check...
This has been answered? the speedo drive and disc are different. just use typhoon forks (as nrgandy suggested)
Try tuning a classic Vespa. I had a Vespa PX 125, ported, 28mm carb, race crank, scorpion exhaust. Went off the speedo D: was a full frame too...
Some people are just idiots :)
Yep! Like tErr0 said, should be fine, should work exactly the same either way it spins as there's nothing on it that makes is uni-directional :)...