The UK's biggest automatic scooter forum.
Separate names with a comma.
Thank you I haven't Perspex it yet but here is a pic
first of all you need to get the kit on buy new vereator and clutch your 70cc will kill all of it get your carb set also start thinking about...
Should never get red hot should not but never that hot boy I drilled holes have a look
Thinking of cutting the bottom of my seat out is there any fast easy way what tools and tips aiming to do this
yeahh a lot better to set up because the jetting will be higher because the amount of air coming in will be less with a 21mm carb the amount of...
This is what mine did and it was my jetting the filter is sucking way to much air in so you need to set your carb up forth at filter and accompany...
Start with your jetting don't touch the oil mix !
Na the engine has been professionally set up and runs like a dream !
Sounds like what you said I had this problem I played around with the jetting and it sorted it but it could be a number of things ill list what I...
More smoke more poke ;)
[ATTACH] They are fairly cheap so if problems in heat go grab one of these
Seems like you have your answer NO there should be okay in the shaft If your tuning a Nrg just a word of advise watch for the pressure and...
Had the same problem go and check your water pump its a piece of plastic that spins and turns the pump if that's snapped damaged it won't push the...
[ATTACH] L plates got to be displayed don't want to be pulled because if they have found one fault they will keep digging for more