The UK's biggest automatic scooter forum.
Separate names with a comma.
It seems that my scoot doesn't hates the cold more than me. About -5c outside fires up lovely and runs OK, however the rev counter now reads at...
Hi does anyone know where to find the indicator relay on a yamaha neos 50? Drawings say it's under the speedo but theres nothing there. Thanks
Has anyone ever made a variator locking tool or knows any tricks on how to hold the bugger still on a 300 MP3? Delivery of the tool is over a week...
Put the rollers in with the plastic covered side facing the left
checked that the variator is still tight?
The clutch springs shouldn't make a dramatic difference as they mainly effect the pull away, stiffer springs give better initial acceleration off...
Maybe try a lower weight roller. The ones fitted now could be too heavy and throwing the gearing to a higher ratio too early
Most likely transmission issue then, have you checked the rollers are not flat spotted or getting stuck in the variator? Also has this probelm...
Does throttle position make any difference to the dead spot happening?
Probably easiest to pull the rocker off and feel how much slack is on the cam chain. If there is a fair bit of slack i would be tempted to change...
Yeah still got it could never sell it, love riding it too much. Its a 1990 C1 jap import so full power 147bhp;), only gave £750 for it. Taking it...
Did you check the cam chain tension was ok when you checked the valve clearances? A knackered/ loose tensioner will let the chain slap about...