Yamaha aerox variator tuning (HELP)

Discussion in 'General Tuning' started by aaro havukainen, Sep 24, 2020.

  1. aaro havukainen

    aaro havukainen New Member

    I have yamaha aerox ns50n (2014) and i have stock parts except i have gianelli extra v2, 4,7gram rollers, little bit bigger main jet and i have taken the washer out of the variator. So i put malossi red torque spring and malossi’s green clutch springs, it now accelerates badly at low rpm but at high rpm it accelerates better than it used to. Can the clutch springs be to loose compared to the torque spring, i really need help with this one.

Share This Page