Would it hurt a 2stroke 50..

Discussion in 'The Workshop' started by leroya500, Dec 30, 2013.

  1. leroya500

    leroya500 Active Member

    Messages:
    116
    If a sports type exhaust and larger carb we're put on and it maxed out at 40/45 mph?
    New to bikes ands 2stroke etc
     
  2. scootzmadness

    scootzmadness Left the forum.

    Messages:
    4,235
    Rides:
    None.
    done all the time, get a good pipe, upjet the carb and should get 40-45 depending how fast it goes derestricted before new pipe
     
  3. leroya500

    leroya500 Active Member

    Messages:
    116
    Leaving it restricted before the new pipe, it's something that I've inherited and it's a bugger to get standard parts!, anyone know what the best jet is for a 19mm carb?
     
  4. Subw00fer

    Subw00fer Snqʍ00ɟǝɹ

    Messages:
    594
    Rides:
    70cc NRG
    helps if you tell us what scooter it is aswell
     
  5. leroya500

    leroya500 Active Member

    Messages:
    116
    Dellorto carb on a ay50 katana
     
  6. A-LY

    A-LY Active Member

    Messages:
    419
    A 19mm carb on a 50 will be shit, get a 17.5
     
  7. Stevep

    Stevep Well-Known Member

    Messages:
    5,898
    Ah yes, but as standard the ay50 has a metal intake pipe. You can get the manifold conversion to a rubber intake, R.acing P.lanet, about £20, then have a bigger selection of carbs to go for. The Leo Vince ZX is a good pipe, as already stated, a 17.5mm dellorto is a good choice, jetted to 82 main with a 45 pilot. Open type filter. then the Polini variator with 5gr rollers. And malossi drive belt.
    Already done one of these, see my post "Why the hell i bought it i'll never know"
     

Share This Page