viewing an sr 125

Discussion in 'General Scooter Discussion' started by gazell, May 5, 2007.

  1. MiNoR cOnFuSiOn

    MiNoR cOnFuSiOn Administrator Staff Member

    Messages:
    14,276
    Rides:
    et2 monster
    16.4 wasent it tango? (at over 100mph btw) just goes to show not every bike with every bolt on hits 20+bhp.. torque is more noticable on a 172
     
  2. gazell

    gazell Active Member

    Messages:
    1,104
    was the acceleration that crap on ur runner tho ant...once u had the gear up put in ur bike was rapid as fuck

    what kind of setup am i gonna need to get 20bhp out of this sr
     
  3. MiNoR cOnFuSiOn

    MiNoR cOnFuSiOn Administrator Staff Member

    Messages:
    14,276
    Rides:
    et2 monster
    you will need to have a p[ipe modded as none that make that power fit on an sr... of course you will need a 1762, 25mm carb a variator to make best of the power. and spot on setup with a good pipe. can get 23bhp with 3 parts (well i can)
     
  4. gazell

    gazell Active Member

    Messages:
    1,104
    well if i go for this it looks like im gonna be campin in ur back garden mate :w00t:
     
  5. gazell

    gazell Active Member

    Messages:
    1,104
    just going back to the exhaust..isnt the pm for the sr any good..what i mean is' is at equal as far as power gains are concerned in comparisson to the pm55
     
  6. MiNoR cOnFuSiOn

    MiNoR cOnFuSiOn Administrator Staff Member

    Messages:
    14,276
    Rides:
    et2 monster
    no, the 52 is pritty pants in all honesty..
     
  7. skatergod

    skatergod New Member

    Messages:
    1,396
    yes pull of was craper....before it was RAPID!!!power wheelie all day long and easy to wheelie...after that could only wheelie it at very low speeds....pull of was ok...(got beat by ben) :msn1: duno wtf he has in his bike!it wasnt that slow tho was still quick as fuck to piss cars of (especialy on the road onto the motor way haha but it was slower then my 125 gearings...
     
  8. gazell

    gazell Active Member

    Messages:
    1,104
    to be honest with ya i dont think im gonna tune the sr up..it seems like a lot of fucking about for crap power gains...probs just gonna mot it and sell it for a profit and get another runner... u can get a good 20bhp out of a runner with just bolt on items
     
  9. wobbly_trials

    wobbly_trials Active Member

    Messages:
    6,676
    Rides:
    RD350, SR125, ICE125
    i'm aiming for over 25 from my SR.

    specs to follow in scooter projects when i have finalised parts and mods
     
  10. gazell

    gazell Active Member

    Messages:
    1,104
    ye but is that from an sr engine ???
     
  11. tErr0

    tErr0 Administrator Staff Member

    Messages:
    5,816
    All the advice minor is giving you would be the same for a runner. The only difference is exhausts.
     
  12. gazell

    gazell Active Member

    Messages:
    1,104
    so basically ive gotta find a decent exhaust for an sr to get a decent bhp..
    u would think that the manufacturers would fuckin make one lol

    that chap from sweden said that the old pm55 will fit...whats the chances of me finding one of them and how will i tell the difference between the old and the new
     
  13. wobbly_trials

    wobbly_trials Active Member

    Messages:
    6,676
    Rides:
    RD350, SR125, ICE125
    yeah, but with LC pump and 172.
     
  14. gazell

    gazell Active Member

    Messages:
    1,104
    im gonna have to run thru some ideas..wobbly we need to get hold of a fucked scorp to see if u can mod it to fit an sr
     
  15. wobbly_trials

    wobbly_trials Active Member

    Messages:
    6,676
    Rides:
    RD350, SR125, ICE125
    yup, i was actually thinking of modding the SR to fit the scorp. it's easier, i can manufacture different lower mount cradles.
     
  16. nrgandy

    nrgandy New Member

    Messages:
    2,180
    gazell speak to buxy and ask him if his mate phill (nrg guy) still has his fuked scorp
     
  17. TangoSR

    TangoSR New Member

    Messages:
    286
    It was 15.6bhp and reached 100mph on the dyno at Mersea island last year, think the dyno was run by SIP, take in mind my scoots had no dyno time before...needs abit doing to it when I get time and money :( :p ..all just bolt on parts ;)
     
  18. gazell

    gazell Active Member

    Messages:
    1,104
    tango what does ur bike top out at when ur rideing it
     
  19. TangoSR

    TangoSR New Member

    Messages:
    286
    90mph clock speed :pimp: ...love it! :punk:
     
  20. gazell

    gazell Active Member

    Messages:
    1,104
    sweet as lol.....
     

Share This Page