Suzuki Burgman UH 125 2020

Discussion in 'The Workshop' started by Stijn, May 5, 2021.

  1. Stijn

    Stijn New Member

    Messages:
    3
    Hi All,

    Haven't posted in a long time but got a new bike 'Suzuki Burgman UH 125 2020'

    Have made some mods already incl. exhaust, polini variator and air filter (all tested and working btw)

    The only remaining thing I am looking at is the Clutch

    I have been recommended this by Dr Pulley Store in Germany
    https://drpulley.shopnix.de/TechPulley- ... zontalTab1

    This is based on the clutch bell being 125mm diameter


    Can anyone confirm this size diameter is ok?
    Also will the mounting hole be sufficient in size?
    (bell diameter 125mm, mounting hole 28x24mm)

    Thanks
     
  2. Stevep

    Stevep Well-Known Member

    Messages:
    5,895
    Measure what's already in there and compare
    You've already invalidated the warranty
     
  3. Daymyan

    Daymyan New Member

    Messages:
    21
    Help. Where to buy Suzuki burgman injection 125 2013 factory exhaust. Thanks in advance
     
  4. Stevep

    Stevep Well-Known Member

    Messages:
    5,895
    Don't bother with factory exhaust, much too expensive.
    An aftermarket equivalent is good enough, and better in most cases.
    Nearly all insurance companies are ok with exhaust changes these days provided it doesn't increase the performance by much
     

Share This Page