rims/hub that fit typh engine with small drum??

Discussion in 'Maxiscooter Tuning' started by jayzee19, Jun 14, 2009.

  1. jayzee19

    jayzee19 Member

    Messages:
    204
    i have a typhoon but id like to know what other rims would swap onto my engine ?? i have the 10 inch rims and would like to fit 12 inch rims! would the aprilia sr 125 rim or the nrg rim fit on my engine ?? would the splines/shafts match??
     
    jayzee19, Jun 14, 2009
    #1
  2. breamy

    breamy New Member

    Messages:
    532
    Rides:
    Typh 172
    nrg rims
     
    breamy, Jun 14, 2009
    #2
  3. jayzee19

    jayzee19 Member

    Messages:
    204
    on the rear not the front?
     
    jayzee19, Jun 14, 2009
    #3
  4. breamy

    breamy New Member

    Messages:
    532
    Rides:
    Typh 172
    theyll fit rear

    ull need nrg forks to fit the front on ?
     
    breamy, Jun 14, 2009
    #4
  5. jayzee19

    jayzee19 Member

    Messages:
    204
    safe well im tryin to get some f32 forks for an nrg !
     
    jayzee19, Jun 14, 2009
    #5
  6. LEE

    LEE Member

    Messages:
    924
    ood luck wth the rf ee minute your looking at around 500 only ones that come up on bay are for gilly very rarly see em for typhs etc
     
    LEE, Jun 14, 2009
    #6
  7. MiNoR cOnFuSiOn

    MiNoR cOnFuSiOn Administrator Staff Member

    Messages:
    14,276
    Rides:
    et2 monster
    m8 got the set on ebay a few months back off the boost ya scoot nrg... forks disk caliper (big one) braided line and spare pads for 300.... to fit an nrg obviously. can use runner forks just need to shorten the fork tube on the frame and elongate the d cutaway on the fork shaft for the steering lock.
     
    MiNoR cOnFuSiOn, Jun 15, 2009
    #7
  8. LEE

    LEE Member

    Messages:
    924
    :banghead: i no if i had the money at the time
    sort of what im saying thats the only set ive seen on ebay that actually are for a nrg/typh in more than 3 years
     
    LEE, Jun 15, 2009
    #8

Share This Page