L.E.D indicators help (Not flashing)

My bike has l.e.d indicators on the front and bulb on the back and it works fine but when I tried putting the same led indicators that are on the front on the back they don't work and just light up and don't flash

Anyone had this problem?

 

this happen to my mate but it was coz one of the bulbs were gon so all the power went on one bulb so it doesnt flash hope it helps.

 

you need to get a led relay for the back

 

resistors from a local bike shop 10 ohms sorted :bird:

 

there not quite 3 p lol maplins are good but you need to know the correct ohms and stuff as they have fucking hundreds of different ones

 

So if i take mine out (if I can find it) a bike should could match me a 10 ohms one up?

theres a maplins 10mins away from my house if they stock them?

 

you just need to add the resistors into the indicator wires dont need to take anything there

 

ohhh I get you

So I just need 1 10ohm resistor on the poss wire? ;s

 

oh ok I'll try to get some from maplins 2morro Front l.e.ds seem to work fine on the front

 

learn sumthing new everyday , i got a a in electronics a-level , how the fuck didnt i know that :w00t: