Help needed 1976 Suzuki gt185

Discussion in 'Bike Chat' started by ginge, Jul 11, 2015.

  1. ginge

    ginge Active Member

    Messages:
    589
    Hey guys I've got myself a 1976 Suzuki gt185 and wondered if any of you could help by pointing me in direction of parts in uk, wiring diagrams etc :)
     

    Attached Files:

  2. scubabiker

    scubabiker NITROJUNKIE

    Messages:
    7,321
    oh i had a gt125 not so long ago (till it was stolen) ebay is your best source of parts. does it run? i reloomed mine, but it was a cafe racer.
     
  3. scubabiker

    scubabiker NITROJUNKIE

    Messages:
    7,321
    2012-03-17 18.31.55.jpg 2012-03-17 18.32.11.jpg 2012-03-28 19.10.17.jpg 2012-04-26 16.55.29.jpg i had a stan stevens crank, with new rods and mains, that he got from japan. the top end was stock 125 (piston ported, no reeds) polished combustion chambers and exhaust ports.....
     
  4. scubabiker

    scubabiker NITROJUNKIE

    Messages:
    7,321
    my seat base was totally rotten, so i got the cafe seat, as i couldnt source a seat base anywhere.... also the inlet manifold rubber things where a bastard to find, i ended up using them from my spare engine and using a fuck load of sealant. but i think the 185 has different clamps...
     
  5. ginge

    ginge Active Member

    Messages:
    589
    No idea if it runs as yet engine turns freely so looking promising got no keys or registration but had a check ran on numbers and all came clear
     
  6. Stevep

    Stevep Well-Known Member

    Messages:
    5,895
  7. ginge

    ginge Active Member

    Messages:
    589
    Cheers Steve top bloke as always and should hopefully get a proper look this week seeing as got a couple of days off
     
  8. scubabiker

    scubabiker NITROJUNKIE

    Messages:
    7,321
    how you getting on with this?
     

Share This Page