Gilera SP Owners

Discussion in 'General Scooter Discussion' started by Dann, Aug 31, 2008.

  1. Dann

    Dann New Member

    Messages:
    653
    Could somebody do me a favour and take a few pictures of your front lights on please.

    - High Beam
    - Normal Beam
    - Both Beams

    Is what i'm after, i am getting pissed off with the cunts screaming out of there car windows / walking past saying my lights are 'too bright' 'broken' when i don't think they are but can't be sure i guess.

    Thanks in advance
     
  2. Jefr0-180

    Jefr0-180 Active Member

    Messages:
    2,658
    The 125 headlights always seem to go higher than they should. They did on my 180, I changed to evo in the end (which won't pass a MOT) but still light the road up and don't piss people off. When I was following my mates cars I had to use sidebeam n stay close to em.....or go infront.

    Try adjusting them to be lower
     
  3. MiNoR cOnFuSiOn

    MiNoR cOnFuSiOn Administrator Staff Member

    Messages:
    14,276
    Rides:
    et2 monster
    run to agarage... get it setup hight wise on there light box, if anyone winges give em the finger an tell em where to stick it
     
  4. Jefr0-180

    Jefr0-180 Active Member

    Messages:
    2,658
    Don't forget the bike :D
     
  5. Dann

    Dann New Member

    Messages:
    653
    had some dick head swearing at me awhile ago because my lights was too bright, and he kept slamming his breaks on causing me to come to a halt every time i got up to 30-40mph, so i ended up getting close behind him and high beaming and bounching front up and down to piss him off, cunt hand breaked in front of me and i just clipped his car used my foot sort of to push myself away from car.

    I was following girlfriend a few days ago, she pulled over told me to go in front cause of my lights, and it's getting to be a every day occurance so i am assuming there is something wrong, will have to take it to a garage, does any garage do this sort of check?
     
  6. kyle1b1

    kyle1b1 New Member

    Messages:
    5,191
    might just be adjusted very high

    adjust it down abit
     
  7. MiNoR cOnFuSiOn

    MiNoR cOnFuSiOn Administrator Staff Member

    Messages:
    14,276
    Rides:
    et2 monster
    somones wound out the wrong screw trying to take the light out... wind the screw at the bottom inwards.. it usually hides at the bottom,just under the front pannel
     
  8. Ciaran

    Ciaran Active Member

    Messages:
    1,804
    Too be honest, if your blinding the fucking cagers least they know your there lol.

    Personally i find if you keep popping wheelies it pisses them the fuck off even more!
     
  9. monty9120

    monty9120 Active Member

    Messages:
    3,624
    Rides:
    Vespa gts300
    one of your bulbs may be in the wrong way., they fit both ways and if the reflector is the wrong way round the beam shoots up

    i had my vxr like this i could see the light dazzling them in there rear view mirror lol
     
  10. WOLFFY

    WOLFFY New Member

    Messages:
    4,135
    Rides:
    Runner 172
    Well, It's better than having no lights LOL
    If they start swearing at you just tell them to go fuck 'em selves.
    I would :w00t:
     
  11. Dann

    Dann New Member

    Messages:
    653
    I don't fancy another rock thrown at me by some un-tax-paying local youth that thinks that can steal for a living, i'd sooner sort it out properly and know when the time comes i have to sit behind a police car, he/she isn't going to spit their dummy out because i've made them partly blind
     
  12. WOLFFY

    WOLFFY New Member

    Messages:
    4,135
    Rides:
    Runner 172
    LOL you could blind old people going down the road :w00t:
     
  13. MiNoR cOnFuSiOn

    MiNoR cOnFuSiOn Administrator Staff Member

    Messages:
    14,276
    Rides:
    et2 monster
    if its a 50 the hight doesent matter.... blind away. theres NO hight restriction on a moped as it doesent have to be ajustable
     
  14. Dann

    Dann New Member

    Messages:
    653
    Nah it's a 125, front bulb went awhile ago and i changed it so i'm going with what you have said Minor me not realising it needed to be tightened a certain way, going to give it a try myself later see if i can make it point downwards anymore than it is set at now.


    thanks for all your posts all very helpful :beer:
     

Share This Page