Could do with some advice?

Discussion in 'Scooter Tuning' started by Chuck12, Sep 16, 2008.

  1. Chuck12

    Chuck12 New Member

    Messages:
    67
    Posted here before, and you guys were absoulute legends, wondering if you could help me again.

    I've got a 70cc malossi and pm tuning powerpipe, goes sweeeeet. I'm gunna get a gear up just to make the top end a lil quicker

    but i'm waaaay more interested in the sound/acceleration.

    was gunna get a Malossi Performance Variator & Torque Spring Kit or the Poloni one, and mabye an air filter for the sound?


    This sound about right? NAything else for accelration or sound that i could get? Stick to malossi, or manye pollini? :D

    cheerss

    this is my car for next year haha. don't want to made a fool by my mates
     
  2. dezze

    dezze Member

    Messages:
    148
  3. RY4N172

    RY4N172 New Member

    Messages:
    3,235
    the polini pack is good consits of variator , belt , rollers , contra spring

    a clutch is a good buy to or clutch springs.
     
  4. dezze

    dezze Member

    Messages:
    148
    as long as your clutch is good i would only do the springs,
    money saved on the clutch could go towards a 21 mm carb :D
     
  5. Chuck12

    Chuck12 New Member

    Messages:
    67
    Would a 21 carb make a differnce?
    As far i know my clutch is okay? Ha

    No one has recommended an air filter? - Anyoone know if they make that much differnce to the sound?

    :drool:
    How much is the pollini pack?

    thanks
     
  6. Saint Jonny

    Saint Jonny New Member

    Messages:
    1,048
    Yeah i'd get one of those combined with a derestricted manifold otherwise it's saft.
     
  7. Chuck12

    Chuck12 New Member

    Messages:
    67
    forgot to add yeah, i'm definetly gunna set some clutch springs on.
     
  8. Chuck12

    Chuck12 New Member

    Messages:
    67
    Jeez man, this shit gets confusing quick.

    I wanna keep this on the cheap, or well as cheap as i can get.

    Clutch springs and air filter?
    Variotor can mabye come later?
     
  9. RY4N172

    RY4N172 New Member

    Messages:
    3,235
    The manifold
    http://www.donotlink-pedstop.com/p/Stra ... -2159.aspx

    Air filter the malossi e13 and donkey polini ones are good
    http://scooter-center.com/catalog/produ ... ts_id=4317

    21mm carb
    http://scooter-center.com/catalog/produ ... 5_175_1312

    Polini pack
    http://scooter-center.com/catalog/produ ... 5_175_1327

    clutch springs
    http://scooter-center.com/catalog/produ ... 5_175_1314
     
  10. Chuck12

    Chuck12 New Member

    Messages:
    67


    I love you. :rofl:
     
  11. WOLFFY

    WOLFFY New Member

    Messages:
    4,135
    Rides:
    Runner 172
    OIT YOU! Hands off my bitch :rtfm:
     
  12. RY4N172

    RY4N172 New Member

    Messages:
    3,235
    There is enough to share lmao
     
  13. WOLFFY

    WOLFFY New Member

    Messages:
    4,135
    Rides:
    Runner 172
    Plenty of Ryan to go around. (if you can grasp him from me)
     
  14. Chuck12

    Chuck12 New Member

    Messages:
    67
    Hahaa I wasn't aware of the male bonding that takes place on here.

    Got 200 quid. ishh

    Clutch Springs
    Polloni Kit thing
    Air filter and Mainfold.

    Worth it or not? Gunna get myslef a gear up in a couple of months, when I'm 17.

    'Preciate it guys. :nerd:
     
  15. Saint Jonny

    Saint Jonny New Member

    Messages:
    1,048
    Sounds good to me mate, should end up getting the Polini shizzle myself as well as the manifold, so obviously it must be good :p Seriously though good buy :up:
     
  16. Chuck12

    Chuck12 New Member

    Messages:
    67
    Wicked, take this down to the shop tomorrow night to book it in. Let you guys know how it goes, if yo want. :D
     
  17. WOLFFY

    WOLFFY New Member

    Messages:
    4,135
    Rides:
    Runner 172
    Make sure you do let us know :D
     

Share This Page