Changing the Reeds on nrg power 05 plate

Discussion in 'Scooter Tuning' started by tony andreu, Mar 11, 2013.

  1. tony andreu

    tony andreu Nrg power 70cc

    Messages:
    26
    Hi have an nrg power 05 plate its got polini 70's kit should i put Polini carbon fibre reeds in? ( it came with the kit)
     
  2. Scooter-Noob

    Scooter-Noob God among idiots

    Messages:
    870
    Rides:
    AEROX in box's :-D
    Simple YES.
     
  3. phil.s

    phil.s Active Member

    Messages:
    490
    Yes or you could have trouble at higher revs
     
  4. tony andreu

    tony andreu Nrg power 70cc

    Messages:
    26
    i fitted the new reeds, well i took her for a run and fuel was coming back out the air filter and very slow top speed, removed them and put the old ones back in.
     
  5. phil.s

    phil.s Active Member

    Messages:
    490
    well you done something wrong then as reeds wont cause that
     
  6. phil.s

    phil.s Active Member

    Messages:
    490
    the stiffer reeds with give you better throttle response and better performance
     
  7. tony andreu

    tony andreu Nrg power 70cc

    Messages:
    26
    and also one more thing guys when shes fully warmed when the revs drop below 3,000rpm the engine cuts its self out?? wierd.
     
  8. Jbis

    Jbis New Member

    Messages:
    11
    Rides:
    Sr50r
    Have you tried adjusting the idle on the carb?
     
  9. steveaerox50

    steveaerox50 aprilia owner

    Messages:
    538
    Rides:
    1999 aprilia rs125
    has it got a auto choke because if it has it sounds like it is sticking on
     

Share This Page