Cant get exhaust bracket off.

Discussion in 'The Workshop' started by ludixblaster, Nov 23, 2008.

  1. ludixblaster

    ludixblaster Member

    Messages:
    295
    Rides:
    gilera runner 125sp
    Whats the easiest thing to put on it to get it off?
    WD40?
     
    ludixblaster, Nov 23, 2008
    #1
  2. m1ck_t

    m1ck_t Moderator Staff Member

    Messages:
    3,627
    Rides:
    alot of shit
    erm, unbolt it? a bit of heat maybe
     
    m1ck_t, Nov 23, 2008
    #2
  3. Mehmet

    Mehmet Active Member

    Messages:
    2,976
    Rides:
    AUDI A3
    X2

    Heat it up....and it should come out.
     
    Mehmet, Nov 23, 2008
    #3
  4. WOLFFY

    WOLFFY New Member

    Messages:
    4,135
    Rides:
    Runner 172
    Crowbar?
     
    WOLFFY, Nov 23, 2008
    #4
  5. ludixblaster

    ludixblaster Member

    Messages:
    295
    Rides:
    gilera runner 125sp
    bolt

    No its the bolt , its to tight so i cant undo it. i need something to loosen the bolt.

    Thanks
     
    ludixblaster, Nov 23, 2008
    #5
  6. WOLFFY

    WOLFFY New Member

    Messages:
    4,135
    Rides:
    Runner 172
    Use a breaker bar? Normally works for me on things like that.
     
    WOLFFY, Nov 23, 2008
    #6
  7. MiNoR cOnFuSiOn

    MiNoR cOnFuSiOn Administrator Staff Member

    Messages:
    14,276
    Rides:
    et2 monster
    :confused: breaker bar on an exhaust?? LOL

    lots of wd40, leave for a couple hours, then more.. then leave it, heat it yp an it will come undone...
     
    MiNoR cOnFuSiOn, Nov 23, 2008
    #7
  8. m1ck_t

    m1ck_t Moderator Staff Member

    Messages:
    3,627
    Rides:
    alot of shit
    drill/grind the bastard , works for me :D
     
    m1ck_t, Nov 23, 2008
    #8
  9. Dec

    Dec Active Member

    Messages:
    3,183
    Rides:
    nothing ugm
    use ur muscles lol or an impact wrench :rofl:
     
    Dec, Nov 23, 2008
    #9
  10. NJH

    NJH New Member

    Messages:
    489
    socket, breaker bar, and a longer one if u need it, with wd40 and heat it if necesary, did it get done up to like 1000000ilbs/ft or smet
     
    NJH, Nov 23, 2008
    #10

Share This Page