Aerox 50 LC : Pipe and Carb

Discussion in 'The Workshop' started by Jagaerox, Jul 31, 2017.

  1. Jagaerox

    Jagaerox New Member

    Messages:
    2
    Hi All!

    First post! :)

    Could anyone tell me where the pipe (pictured) goes? It's the top one by the water pump.

    I have checked a workshop manual but there is no mention of it.

    Also...

    I got the bike with an aftermarket carb (pictured), it seems to be an unbranded one but similar to a stage 6 one. Has anyone got any information or a manual for one of these? I am tempted to swap it back to stand but the bike did run well on a test ride with this carb, but it has lots of ports with nothing attached.

    Thanks!




    20170731_100710.jpg 20170731_100749.jpg 20170728_134102.jpg
     
  2. Tamiyacowboy

    Tamiyacowboy Pippa's Owner

    Messages:
    1,850
    Rides:
    Piaggio Skipper
    vacuum - fuel - oil nipples on the carb.

    the crankcase pipe could be a vacuum line to presurize the fuel pump allowing it to pump fuel to carb, it could also be a breather, im not to intouch with the aerox motors, but i am sure one of the guys will pop in and cover that area for you
     
  3. Jagaerox

    Jagaerox New Member

    Messages:
    2
    Thanks!
     

Share This Page