a 180 barrel and piston on a 125 block

Discussion in 'The Workshop' started by jj180, Dec 7, 2007.

  1. jj180

    jj180 Active Member

    Messages:
    2,250
    Rides:
    Mrt 183/Vespa 300
    what is needed to be done to put a 180 barrel and piston on a 125 2 stroke block ?
     
    jj180, Dec 7, 2007
    #1
  2. wobbly_trials

    wobbly_trials Active Member

    Messages:
    6,676
    Rides:
    RD350, SR125, ICE125
    the 125 cases must be machined out
     
    wobbly_trials, Dec 7, 2007
    #2
  3. MiNoR cOnFuSiOn

    MiNoR cOnFuSiOn Administrator Staff Member

    Messages:
    14,276
    Rides:
    et2 monster
    or the barrel machined back to the size of a 125..
     
    MiNoR cOnFuSiOn, Dec 7, 2007
    #3
  4. jj180

    jj180 Active Member

    Messages:
    2,250
    Rides:
    Mrt 183/Vespa 300
    ok fair enough is this worth doing, and how much ruffly would this cost thanks for the help so far
     
    jj180, Dec 7, 2007
    #4
  5. MiNoR cOnFuSiOn

    MiNoR cOnFuSiOn Administrator Staff Member

    Messages:
    14,276
    Rides:
    et2 monster
    ill do the conversion to the barrewl for 50 quid. it basicly makes a polini 175 kit (same thing just the spigot diameter is smaller on the polini but the same people make the kits)
     
    MiNoR cOnFuSiOn, Dec 7, 2007
    #5
  6. jj180

    jj180 Active Member

    Messages:
    2,250
    Rides:
    Mrt 183/Vespa 300
    ok sounds fair then i no i got the parts to fix my 172 if it knackers would you recomend doing this then, how would we go about doing this would i have to post u the stuff and obviously sort the money out but where u live mate im in east london
     
    jj180, Dec 7, 2007
    #6

Share This Page