2011 derbi senda x race brake light issues

Discussion in 'General Scooter Discussion' started by luke.russell.771, May 16, 2015.

  1. luke.russell.771

    luke.russell.771 Member

    Messages:
    84
    Been a while since been on here just bought a 2011 senda 50 for 500 but I'm having brake light issues the pedal or lever don't activate the brake light it's had an led rear light fitted and lights up when running but doesn't get brighter when brakes are pressed any suggestions ???? uploadfromtaptalk1431799779753.jpg
     
  2. scubabiker

    scubabiker NITROJUNKIE

    Messages:
    7,321
    does it work off the front brake switch?
     
  3. luke.russell.771

    luke.russell.771 Member

    Messages:
    84
    No nothing at all front or back going to try and trace a loose or corroded earth wire but if it isn't that I'm stumped lol
     
  4. luke.russell.771

    luke.russell.771 Member

    Messages:
    84
    Just checked my wire from front switch goes into main loom also wire from the rear goes into a connector block that also goes into main loom it's gotta be at the light as both are not working
     
  5. luke.russell.771

    luke.russell.771 Member

    Messages:
    84
    Will do well I won't I'll ask maintenece at work lol
     
  6. luke.russell.771

    luke.russell.771 Member

    Messages:
    84
    Done it found a very coroded block connector cleaned it and I now have brake lights thanks for all your help and was this an ok buy for £500 2011 derbi senda x race
     
  7. scubabiker

    scubabiker NITROJUNKIE

    Messages:
    7,321
    one thing to watch out for, the front of the loom where it goes past the steering head tube, can break, ive soldered a lot of them in the past!
     
  8. luke.russell.771

    luke.russell.771 Member

    Messages:
    84
    Also does anybody have any parts for these I'm in need of a new stand and where the best place for tyres if anybodys from the west midlands and I'll look out for it
     
  9. luke.russell.771

    luke.russell.771 Member

    Messages:
    84
    Already fast enough no idea what's been done but will get right up with ease and stay up in 1st and second and I know it's going much faster than my last bike but can't be sure as Speedo cables broken but might crank and 70 kit as well depends how soon I need to rebuild
     
  10. luke.russell.771

    luke.russell.771 Member

    Messages:
    84
    Definatley boring lol don't know if i van register it as a 70 or not as can ride up to a 125 anyway just use this as the insurance is cheap lol I'm going to take head off soon and look at size of piston as have a slight feeling it's already got a 70 kit on it but reckon I could get an indicated 60 out of it as it is
     
  11. scubabiker

    scubabiker NITROJUNKIE

    Messages:
    7,321
    the senda makes 7hp on the standard pipe and cylinder.... for parts, you can use derbi senda/ aprilia rx/gelira something or other. all the same shit
     
  12. luke.russell.771

    luke.russell.771 Member

    Messages:
    84
    Looks like I got happy to soon as when the bikes running the lights are backwards bright when running and dimmer when braking so dosent make a difference lol I'll swap some wires round tomorrow and see if that helps
     

Share This Page