cratch: hay guys i need help :banghead: i have a runner 180 r reg ive stripped the engine and put it all back together with out new pistons rings(didn't look to bad still got compression) after doing my rollers belt carb and clutch the bike was riding nicely fast and had quick take off. it rained the other day while i was riding but i took the stator cover off so i could get the fly wheel lightened and fort it look better so i left it off obviously it all got wet. next day opened my garage went for a ride and less then 5 min in to the ride the bike cut out now i noticed a skweek coming from the crank bearing on the varieator side and every time i ride it now the bike dose the same thing cuts out at full rev or just as the vaireator's about to change gearing now my bike starts sounds like it wants to cut what could it be :write: i put new plugs triple pin and ngk racing plug ive tried my reeds ive tried my vacuum carb (pin position air screw idle screw my fuel lines r new and the only thing i havent done is check the piston , rings or (gasket i used the old one put it back on when i done the rebuild please help me ghost ryder :mod:
