The UK's biggest automatic scooter forum.
Separate names with a comma.
I have a runner engine on a fastrider frame and I want to put a Airsal 70cc 6t racing aluminium cylinder. And I want to know what carbourator size...
Hello, so, i bought this new 21mm carburetor and the chocke on it is not the same as the original choke, i don't know how to install it on the...
Hello, can someone help me, my aerox not starting. I cleaned and checked spark plug, carb also new 19.5 dellorto phbg BS, fuel coming in carb, I...
Hi everyone! I've been looking for a longer lasting 70cc kit and found that the due plus has the most potential for hp out of all the cast iron...
Hey, Bike is 2002 Gilera Runner 50 I’ve recently did a full engine rebuild, new crank, bearings, waterpump,.. after I put everything back...
Hey , so i m coming here with no ideas. Got 70cc moped stayed in garage for 2 years. Just doesn't run. What have i've done , i discovered faulty...
Hey, I was wondering what to put for stunting? I was thinking about stage6 streetrace 70cc and pro replica ( streetrace because its cast iron and...
i have an areox thats around the 2004 edition of the bike an ive replaced the cdi coil battery and i have checked the flywheel stator works fine...
I have an aerox 50 2t 2015 and have bought a yasuni sports exhaust for it and changed the rollers and I’m now thinking of buying a 70cc kit for it...
I have a fastrider engine on my zip. I got it with stock 50cc cylinder , 12.5mm carb and stock exhaust. It didn't have a good top speed and i also...
Hello guys, here is my HE Baotian project, i have changed few setups but this is the current one. I will put pictures from the work of the last...
just bought what I think is a 50cc malossi kit but it looks quite big for a 50 can a 50cc piston have a diameter bigger then 40mm?
I recently took the 70 kit off my ped and am decided to down grade to a 50 to try and avoid the engine seizing again and was in a motorcycle shop...
I have been riding my zip recently and have let the 70 kit be run in and am now going to higher speeds and I have noticed that at around 45mph it...
Any ideas what els I could do to my setup? Yamaha Aerox The SET UP: Stage 6 Mk2 70cc raging 0.6 squish & a few mm advanced on stator...
Just looking for some advice on my new set up I’m building. Need some suggestions for roller weights - bearing in mind the over sized trans...
I just built a 70cc 2 stroke zip. I had a stock airbox with normal sponge in, 72 main jet, leovince zx exhaust. Was running good n shit then after...
Which of these kits would be the best for Gilera Runner with 19mm carb, s6 pro replica and rms crank(12k rpm max)? Stage 6 sport pro mk1 (Athena...
After seeing Henry Favre on instantgram, I decided to get my ass into gear and plan a ride. I missed out on the distinguished gentlemans ride...
I have a Gilera Runner with: DR Evo 70 Malossi Multivar (3x5g and 3x7.2g rollers) Malossi Fly (green springs) Malossi Delta bell Stage 6 Vforce 3...