The UK's biggest automatic scooter forum.
Separate names with a comma.
Hi I'm having running problems with this scooter it start every time rides at low revs but I took out today and you full throttle it seems fine...
Thanks would heavier rollers Help? I know they can take a bit to get going but this is a bit too long to set off I'm thinking maybe open airfilter...
Hi guys I need help with my new scooter I bought as project and needed head gasket which I put on. The bike is all standard other than the race...
Hi guy's I need help sorting my scooter out its the peugeot speedfight 2 100cc 2006 model. I bought the bike and got told it needed variator...
Hi guys I bought a yamaha cygnus 125cc the top end was gone so I bought a second hand piston and barrel off a running 2009 model. I bought 2 new...
Yeah thanks, what I mean is when I pess the brake lever and press electric it just clicks now, as before it would work but only one lever would...
Hi guys I need a bit of help working out why electric start won't work! it has been faulty a while where only rear break lever would work the...
I'm not 100% sure but if the blue and yellow is pick up pin then it may not be letting enough power through to CDI but as I say not sure if pick...
Should I try trace the 3 back to try get back to good wire if possible as a last resort, then if not replace CDI.
Cleaning carb has solved the starting.
Sorry one is white and one yellow
The white and yellow wires don't go to CDI yellow goes to a solder of a bunch of yellows and white goes to a little box maybe regulator ,when I...
Hi I tried today it started first kick bogged when I put throttle on kicked again , let it tick over to let petrol through had a go on it for...
When I had carb off I noticed it was a 86 jet, does anyone know if this sounds right as I'm sure they're a little lower standard jets on these...
Ive been using the big one not the one with red on it
Yeah thanks ,I have give a good blow through all holes and put all back together in the order stated I will have to give a try tomorrow as its a...
Yeah whats best way to clean I don't have carb cleaner , or do I need that to clean it?
Thanks and should I clean the main jet in the carb as well ?
Yeah I understand belt can wear down and rollers can too to cause these issues ,I just checked them and don't see any signs, I could get a new...
You sure cause it gets to 40 with no problem, but it is hard to start when I leave it sat a couple hours, it's just had new plug put in is there...