The UK's biggest automatic scooter forum.
Separate names with a comma.
By the way i have a 90 main jet with 17.5 carb what it had in it as standard and ran fine
The other day my oil pump tube slightly split and caused the moped to cease i have now rebuilt it and ran it for 10 seconds with the split oil...
I have messed about with the screws but still no good and took the air filter apart and its fine
Yes it is a little black but that's not the problem I'm sure of it it starts perfect runs fine when you rev it it bogs
I have a manual 17.5 mm carb on it atm but its not running properly I brought the bike seized but have sorted that problem it cuts out as if there...
Cheers so its a 12 mm carb
Meet up around worcestershire?
Mine is an 2002 as well I'm gonna clean the carb if still no look i shall check the air box I have tried it with out the air box and still has the...
I'd leave it at that anything else it starts to break rattle etc I wouldn't even bother doing the washer did mine and it seems to rev more but no...
I have also brought a new spark plug and cap
I have a Standard air filter and the spark plug was wet i have had a little play with the screws on the carb put them all the way in then took...
I have been able to get it to high revs a few times without it bogging most the time it is stright away before the revs even get that high
I have only took it to high revs a few times to check it its pretty much as soon as you go full throttle cleaning the carb was next on the list...
I did the pink wire on mine and got about 40-45 on a good day on the flat then started messing with the carb and ripped the rubber bit at the top...
I brought a aerox which was a non runner i brought a new barrel, piston, head and Crank shaft this got it running but now it bogs at high revs it...