The UK's biggest automatic scooter forum.
Separate names with a comma.
i dont think you can get these for a speedfight :( anyway i just went to see if that is the problem and i could easly suck it in so the tap openes...
Sounds like its almost 100% that its the pipe, thank you very much ill check that tomorrow and will come back with the result :) Thanks again
i will make sure to check that but if that is broken the shouldnt the bike run after getting some petrol? when i start it its all good i can ride...
i took the tap out before as i thought that might be the problem, but it was fine and worked as it should, when i blew into it it kinda opened the...
im looking for a meet up or a ride with some new people, i would be riding a 70cc speedfight 2 and my mate on an sr50, so is anyone interested?
My speedfight 2 doesnt get any petrol into the engine, it does after staring it so i have to take the spark plug out, put petrol right into the...
i had lots of problems with my kickstart, them fake non peugeot parts will brake/ get worn quite quickly so watch out for that and dont kick it...
Hello everyone, i need help wih my moped, i have a leo vince pipe on it motoforce 19mm carb and motoforce vario, 7.5 rollers i belive, recently i...
Thanks mate ill try it when i wake up before college, but is this gonna help? i mean my revs are REALLY high, Thanks for the help once again :)
8.5g rollers now, no change
Hello everyone i need help with my speedfight 2 (once again) basically it revs way too high and i dont know what i can do, it revs so high that...
Hello, i put a 70cc big bore kit on my moped, when i kickstart it it just locks when the piston is all the way up, obviously i thought that its...
my sf2 wont accelerate too fast... infact it mas much faster when i had it stock just with zx leo vince but i had to change the carb n variator,...
my sf2 is really slow at the take off, i mean its reaallyy slow until it gets to 5 mph then its all good cause it takes off quite fast from there,...
Ok thanks :) i just bought a new belt, variator, rollers and a carb as mine was leaking, hopefully one of those was the cause :D
do you have any idea what size are the stock rollers on a sf2 ?
I removed all the variator restrictions, it was a plate as on a sf2 there is a plate instead of the washer, but the rollers are in a bad shape, in...
Thats the main jet i was talking about :) and my cdi is one of those:...
i have a leo vince zx exhaust, and my jet it 58 atm as the stock one was 52, i have removed the plate off the variator already, so i just need to...
My sf2 wont go over 40mph no matter what i do, downhill, straight, alwats 40mph, i have a leo vience exhaust which i took the little cone out of,...