The UK's biggest automatic scooter forum.
Separate names with a comma.
Just curious what needle people have found suit scoots the best. I did a fair few trials with various needle set ups on my FXR180 and eventually...
Hi everyone, I'm after a bit of advice on fine tuning my FXR180 which I use as a communter. I have a 28mm PWK rigged up with...
Hi guys, I put a 28mm PWK on my Runner 180. No other mods really on this bike. Rigged it up to the std airbox with the use of flexible...
I hear you. I was thinking of going down lower with the main jets but when I got down to 128 I found that the revs were hanging badly. I have the...
Thanks for the input. The airbox connection is 40mm. The carb connection is 50mm. I did try without the main in right at the beginning and it was...
Standard 180 airbox with standard element.
Today I tried a 128 jet and various clip positions on the needle but the problem still remains - dying at about 1/2vthrottle. Has anyone found the...
My problem is that I thought that you should sort out the main jet first but I can't even get close to 3/4 throttle. I read somewhere that...
Trying to set up my BGM Pro PWK carb on a 180 2t. It is a Powerjet version but I have blocked off the powerjet pipe while I am tuning it. The...
I recently put Malossi green springs in the standard clutch on my FXR180 2t. I gave the bell and clutch a sand with some fine sandpaper at the...
If you are trying to start the bike with the trans cover off, the bendix will jam against the outer pulley as it needs to be supported by the...
Yeah thanks. I wasn't concerned about buying a new one if I have to. Just in Australia that means about a 2 week delay for postage from the UK,...
Thanks, I should have explained better. It's a fresh 172 setup - just fitted new crank and top end. The revs pick up quite a bit before taking off...
I fitted green malossi clutch springs to me runner recently. It takes a bit of getting used to. Not ideal when in traffic at about 40km/h. Seems...
Hi everyone, As the title reads i'm trying to fit a 28mm PWK to my runner. The slide is not seated with the std throttle cable...
Hi, Just got my 180 2t Runner back on the road after a long rebuild. Left this one stock standard as it is my commuter. There is only one...
So set into it like in my last photo?
I'm reassembling my Runner and came across these rubber bushes. Does anyone know where they go? I thought perhaps they might have something to do...
Hi mate, Just read through the thread. Like your style. Like to do things properly - I like that. Did you have any trouble fitting...
Hey guys. Just an update to this. I ended up buying the fancy BGM one from scootercenter. I confirmed with them prior to buying it that it would...