The UK's biggest automatic scooter forum.
Separate names with a comma.
no, i know its carberation, iv been karting for 5 years, i know the principles of a 2 stroke engine. its like revving a car in neutral, if it...
where am i gunna get a needle ? do you not want to just set my bike up for me :D:D
it wont lol, thats what im saying, iv tried needle in 4 different positions, different jets, diff idle mix;s etc ;) tis tres shit
ive had it screwed all the way in, and like to about 5 turns out at 1/2 turn increments and makes shittt all diff
noooo, tis carburation, like the engine stuggles to rev, i know i probably sound dumb ;) ive never really setup a slide carb like these before,...
basically, ill tell you exactly what happens. get on scooter, go to pull away, burbles and bogs like choke is on, then revvs build up, pulls...
na because tis even like revving it on stand etc, with no load so cant be rollers, and i put some 3.6g's in and just revs and acceleraqtes...
basically, when you initially put the throttle on, it burbles and really bogs, like the chokes on, then it wil clear at higher revs and ride fine,...
stock carbs back on, i need to get myself some more jets, it just seemed like it was runnin very rich, even with a 70mj and needle in lowest...
think im gunna have to stick standard carb back on tbh, cus all the jets iv got are 88 + and its on a 70 atm and is nearly there :S i just...
airbox is de-snorkelled and drilled etc already, tis modded like, its just weird, you back off the throttle, then when you go back on the...
its all on and conencted up now, down to a 70 jet, as wouldnt even run with an 88, it runs okay atm, but its still not as good as it should be,...
okay where do i connect the oil pipe (autolube) does it just mix in the the air/fuel as it goes into the engine, or shouold it mix in the flaot...
how much you after?
yeah, its pretty simple really, m5 = 5mm etc. however, if you wanted to make a hole to put a thread in for a m5 screw, you wouldnt drill it...
my mate said hes got a load of jets so ill try them, na 2 and 6 are diff, they're both on the same side (mainifold side) but either side i know...
quite old indeed, however LOL :w00t:
will a 70 main jet be too lean? iv got a 75 on a 12mm carb and thats a tad richh. need an answer tonight as its going on tomorrow. also,...
i have it in my hand, and it looks identical to that, except the idle speed adjuster and it doenst look so new ;)
Hey, was just browsing around for karting info for a friend, and came across this, may be of use to some people....
