The UK's biggest automatic scooter forum.
Separate names with a comma.
Hi i am currently going to fit a 70cc bote kit to my ajs firefox 50 2018 . I wantvto get all the parts beforehand so its not of the road too long...
I have a gilera runner with a 172 malossi kit on it . After filling the water bottle up with coolant it comes straight out of the head but which...
Hi I have just fitted new main bearings to this engine and when I removed it I didn't take note of where the pipes from the fuel pump go. I have...
My son ran out of 2 stroke oil and the engine was seized. I removed the barrel and piston and the bottom end has seized. I filled crankcase with...
Update really to the previous thread of low compression. That is ok apparently at 80-90 psi so I changed the carburettor for a new one. Got the...
Still trying to sort out my low compression reading of 80 bar. Piston and barrel look perfect and are only 2 months old. Could worn crank seals...
Hi please can anybody tell me what the compression test should read on a standard 50cc nrg 50. I have done a compression test but not sure if its...
Hi I have just purchased a gilera runner 2010 and it keeps cutting out and then not starting. I have put everything back to standard and need to...
I am looking to purchase some new dashboard bulbs and holders for a speedfight 2 as mine are rusty and broken. Any ideas where I can purchase...
Hi Please can somebody help me. I have a speedfight 2 with polini variator and clutch. When starting off you have to rev it really high before the...
50cc gilera runner puring fuel out from the air filter. I have cleaned the carb and float etc and the bike starts but then after a while pours...
I am trying to buy a Ignition switch back for a runner. All the ones I have found on the Internet have a block connector but mine has soldered on...
Hi My sons Speedfight 2 is hard starting when warm. I have fitted a new automatic choke and it starts first click when cold and the automatic...
Can't get my oil light to work on my speedfight 2. Checked all connections and continuety from the sender to the dash and still nothing when I...
Hi I lost my spark on my speedfight and found theat the stator was faulty. I got a good tested used one and got my spark back.After running...
My speedfight seems to wobble at the handlebars even going very slow. I have noticed a bit of play in the rear wheel of which I am going to put in...
Finally rebuilt my engine with new crank,piston,bearings,seals etc. After starting it was ticking over fine and then just stopped with a bit of a...
I have just purchased a speedfight 2 haynes manual so that I know i can be 100% correct on the main jet size. The one thats came as no information...
I am just rebuilding my engine and fitting new rollers why I have it apart. Can anyone tell me if there should be a washer before the variator...