The UK's biggest automatic scooter forum.
Separate names with a comma.
You have got to be kidding me ?? If you do end up going let me know ill come for the laugh :) I need a road longer than 6 mile to beat my record.
Stage 6 petrol gauge help!!!!
Ok, Iv bought a stage 6 petrol gauge with a backlit display and have connected the red and white wires for the power to the unit and is all good,...
125 loom off what ???? A 125 zip is 4 stroke and if i took it off a typh or sumat then i want my clocks and shit to work aswell which would be...
What is the simplest way of converting a zip 50 wiring loom to run a 125 skipper engine i have 125 regulator cdi and coil, but dont know how to...
Do you need any water pipes going to the cases by the stator like on a liquid cooled engine, if you do how do you make one of them??
Ash you need to post it in general scooter discussion mate more ppl post in there :)
its gunna be sick, wish i could have zip set up before but be ryte. you camping ??
I have a zip 172 and when it was set up it was mint good throttle responce, but now after like over a year it has got lazy the throttle responce...
what temperature should a air cooled 172cc skipper engine run at and what temperature is too hot??
where do your think i could get a zip 50 2t lc wiring loom from brand new or in good condition need one asap
nah al do it mate
My master cylinder has siezed up so when i let go of the break lever it doesnt release the pressure fast enough on the caliper so it sticks a bit...
i would richen the mixture by highering your main jet by one or two sizes rather than the mixture screw - if you want to do it with your mixture...
All engines are slightly different there is no point asking for jet sizes and roller weights when the chances are it will be different for your...
All scooters are like that as soon as they get warm they do decrease in power by like half to a full bhp nothing to worry about, i would check you...
hahaha thats joke !!
I would put cylcinder on with just the two stubs and mark out the edges of the ports roughly so you know how much to take off...
yeah but the harder the springs the higher the revs have to be before it sets off...
I had a sr70 and used a 98 jet in it, try that or even higher i would get a jet set from 90-120 or somoething ands try them..... I wouldnt use the...