The UK's biggest automatic scooter forum.
Separate names with a comma.
As a matter of fact she's very fond of cricket.
Say no more ;)
Wish I could get a 172, however still on a 'L' plate after 13 years, on mates rates at the CBT, if only. I just can't find the time to do the...
Thanks Creamsodauk for your input, I did this with the drill, you're right takes forever, so I filled up a big old syringe and pumped this in the...
Thanks for your replies, very possible with the oil as I replaced the oil pipes, which don't look the same as original, however do pump the oil...
Hi been having a lot of problems with my Runner 125 2 stroke overheating, have change everything on the coolant side, however still not luck. But...
The o ring was new, also very careful, and kept everything clean. thanks for your advice.
finally, sorted. little heat, very little permatex and lots of paitents and it fitted, only got water in at the moment to check for leaks, but...
I do hope someone can help me on this one, as it's driving me mad and I don t want to get any more head o rings. Ever time I rebuild the engine,...
Got the thermostat out this morning, opens a bit sooner than the Haynes Manual states, also the valve lift is 6.2mm where as the manual states...
Got the new jet 86 and a standard idle jet 45, checked there was no air leaks and adjusted the carb. Place a new spark and went for a ride. Spark...
Had the carb off before coming to work and have a 96 on the jet, would this be the problem? Now that I renewed lots, more sensitive, never changed...
Thanks Marsh I'll take a look. It's standard 125.
Runner FX 125 2 Stroke Have just finished a rebuild, new bearings, seals, water pump, oil pump cogs and belt, new Malossi reeds, new piston and...
Thanks Marsh.
Got a couple of questions, any help appreciated. Gilera Runner FX DD 125 2 Stroke. It's that time again to split the engine and replace the dam...
Hi all, after a bit of a help with my Runner 2 stroke 125 FX. Have fitted a new torque spring and clutch. Put bike back together and now have a...
