The UK's biggest automatic scooter forum.
Separate names with a comma.
The pipe in the pic is not a Stage6 Pro Rep, it looks like it might be an old (discontinued) Stage6 Pro. It looks like maybe it has been polished...
ok, some good points here "would be nice if the jet size was mentioned with these dyno readouts." can't really be done unfortunately, there are...
I just reviewed this phone call- all I can say is the original poster ought to be be highly embarassed if the correct transcript of this call were...
68 is the correct starting point with the standard carb, standard cylinder, brass plate removed, a sports pipe and standard airbox and air filter...
Hi Mike, >>coming from the stator to the plug is >>red/yellow >>white >>blue/white >>white/red? >>How do i test this with a multi meter and what...
Pm'ed you ;)
unfortunately that really does sound exactly like main crank bearings :( not 100% sure about the whirring noise from that vid but the noise before...
it doesn't matter so long as the stator and coil are is connected to the cdi and the black/wire at the cdi is not earthed it should spark- nothing...
correct, if it is the same as 99% of other chinese bikes (it will be) you can disconnect the black/white wire at the cdi and then it will spark if...
if you want to eliminate *all* the kill switch wires for testing just disconnect the black/white wire at the cdi so as it cannot ground out the...
hi, normally you need to join the green and the green/white wires together otherwise the starter motor won't work- and just leave the black/white...
Hi, yes the Silent Pro should be a good choice for what you're trying to achieve and makes around 8hp with the LC Streetrace kit at around 8,500...
[IMG][IMG][IMG] full blog... http://www.pedparts.co.uk/blog/tecnigas-exhausts
no, this is absolutely wrong ! we've even run a timing light on many inner rotor kits to prove this and they are all identical by 7-8k... running...
ah no, as soon as the engine is over around 5000-6000rpm all inner rotor kits from all the manufacturers I know of run fixed advance which is...
check his pic, he means the mount for the exhaust bracket :) this is common on speedfights especially if the exhaust hits something (e.g. the...
sorry missed that- basically exactly what scubabiker stated so concisely in another thread "put in a big jet and go down until it feels right"...
Hi Merlin, by far the most important mixture to get right for a 2-stroke auto 50/70 is full throttle under load. There are other problems with...
this pipe will not work at all well if you leave the restrictor in place, I would not consider buying the pipe if you are going to do this, it's...
"Simple plug colour covers the whole mixture range at all throttle settings. A plug chop just looks at the effect of the main jet." absolute...