The UK's biggest automatic scooter forum.
Separate names with a comma.
I'm getting a hissing sound when I either crank the engine, or after the engine is turned off after i've run it for a few minutes. The coolant...
Done that...all clear. However, ive been doing some further research, and it points to the valve clearance and timing. so i'm going to be checking...
My carb is starting to flood when cranking. It has gotten to the point where the fuel is now being spat out of the rear of the carb, as opposed to...
how do you know that you are getting no spark? have you taken the plug out and turned the engine over? if not, try that first. keiko
funny you should say that, i was looking on ebay for cylinder heads. i found a 125, and a 180. i managed to compare the underside of the two....
the timing was correct. however, the piston did look like it poke slightly out of the barrel at tdc though....
i recently changed my barrel from 125 to 180. i bolted it all back together, now when i try to start the engine, it just sticks. ive pulled the...
thanks for letting me know. the leakage is coming from round that side, so im going to check it out tomorrow
i put a 180 cylnder on my dna. when i crank the engine, oil and coolant freely drip from the bottom end of the cylinder. by the pipes. could this...
im having the exact same problem. ive changed the head gasket and coolant is still ending up in the oil sump.
thanks. its probably a stupid question but i had to check anyway. ive managed to fix it by soldering the main fusebox from my old loom on to this...
ive just replaced the main wiring loom on my gilera dna 125. and i now have no electrics what so ever. no dashboard display, lights, etc. the...
[ATTACH][ATTACH]
a gilera dna 125. constant vacuum (cv) carb. according to the manual.
i have a constant vacuum carburetter, and would like to know if anyone has any diagrams of what hoses connects to what on the carb. all i know is...
does anybody know of a tried and tested method for removing the fork seals? ive tried using a gear pulley but had no luck what so ever... thanks.
im building up a gilera dna as a project. i have a wiring loom from a 2001 bkie, and wanted to know if i could use a 2002 left switchgear with a...
thank you. :D
yes, thats the one. ive tried ebay, but found just the full kit.
oh rite. um i dont know if im talking about the rite part. basically, i want the piping that runs from exhaust, to the engine.
