The UK's biggest automatic scooter forum.
Separate names with a comma.
Checked it today, it was a frayed wire. It's all good now only that the lights are still dim and that indicators don't work when the lights are...
BUMP!!
I have recently purchased a 50cc Gilera Runner and i'm having electrical problems. I was wondering whether anyone else has encountered them or...
Springs haven't changed and I had 5.0grams in, it didn't kick in until 10-12seconds and when i put lighter ones in it worked better,
Ok so this is my setup: 4.3gram malossi rollers 17.5mm carb 68 jet Standard airbox with malossi red sponge in Leo vince Exhaust 50cc Gilera Ice...
Yea, standards either 55 or 56, and I was going along the PedParts guidelines. Gonna try every jet I got tonight and if it don't work it must be...
I have a 50cc Gilera Ice, recently changed from a 70cc kit and i'm struggling with jetting it. It has a standard Airbox with a Malossi Sponge...
I can't get the carb screw off as it has rounded off a bit, anyway I can get it off without rounding it off even more? Cheers, Wunny
Ok mate, thanks for your help :) gonna go to the petrol station when the weather get's better. Thanks Wunny
Could running to much oil not make the ped start?
The needles on 2.
My mixture screw is out 2 full turns and a half. Need to check my needle setting aswel.
It doesn't smoke at all, it starts first kick, the plug is brown and it cuts out with a tiny bit of throttle.
It stays running for about 30 seconds yea, and stock is 56, and i took it to a garage when i had my TT on and they upjetted it to 65, so i put a...
No, as I said, I changed the jet to a 65 from a 118, so i have changed the jets. I put a 65 jet in as everything standard apart from the exhaust.
I got an engine with no-named 70 kit, tecnigas exhaust, 17.5mm carb and malossi sponge in airbox for £60 mate. Thanks, Wunny
It's autochoke and basically it had a 70cc kit on it but then that fucked up (5th 70 kit :( ) so i thought fuck it, i'll change it back to a 50cc...
I've cleaned my carb and messed around with the idle screw, still doesn't work. :/
Ok, so here's my setup: Piaggio Zip 50cc 2 Stroke Premix 17.5mm carb 65 Jet Standard Airbox (Malossi Airfilter inside) Stage 6 Replica Exhaust...
This picture shows the black inners and the new number plate position and the blue front wheel, still need to do the back and get a glovebox door,...
