The UK's biggest automatic scooter forum.
Separate names with a comma.
seems like a better idea than bodging a typhoon engine into a zip and as i have neither bikes probably would be less hassle and cheaper. they seem...
yeah undo them and then the 3 that hold the fly wheel cover on
nah pretty simple thing to do just be carefull putting the bearings in take you half an hour max
well from standard everything. new crank, bearings, gears, variator, exhaust, carb, reeds, clutch.. and to make it fit im sure you need to grind...
is this when your riding around? i think what your calling a pilot jet i call an idle jet, but basicaly you only use the main jet when your riding...
what do you mean checked the float did you just look or properly test it? mines been flooding and it was because the float was set wrong. if you...
yeah think its a longer stroke crank, so you can get the 90cc without having a massive bore.
well make sure its set up right, so it doesnt run too lean or rev too much. my crank went so id always suggest you get a new one.
still needs bleedng then, it takes a while. only stop when you carnt see no bubbles coming out. and if the levers spongy then it still needs bleeding
Re: Yamaha Aerox 2010 w/Doppler S3R (BAD ACCELERATION) *HELP if its over heating then its probably too lean like people are saying get that...
yeah you need to take the pump out because the seals behind it, think thers a circlip on the cog too? youve probably done it now anyway. aerox...
all you can realy do is look. if you know where its leaking from check loose pipes, cracks, splits..... and then obviously replace whats broken....
okay, if you pump the lever then keep it pressed, then open the nipple for a few seconds then close it and then repeat the process and make sure...
how are you bleeding them?
you have to take the flywheel cover off aswell, so you can get to the cog once youve done that thers a pin that holds the cog on to the shaft take...
well as i was typing that my dads just told me the carbs been flooding so he's adjusted the float and now put a 92 main jet in and said its...
yeah i know there not the best but it was cheap and i needed a new kit at the time. i hardly ride it now but since its summer and warm figured id...
okay yeah sorry, just seemed a universal problem regardles of make and mods and that. anyway its an aerox minarelli engine. pm 70 kit, crank, 21mm...
scooter misses at mid range and around 50+ with 4.5g rollers ive played with with the main jet and 90 seems to be the best but leaner or richer...
