The UK's biggest automatic scooter forum.
Separate names with a comma.
Hey guys! So I got a Gilera Runner, with a RS50 electrical wiring, voltage regulator and speedometer with Tachometer. (no Idea how that happened)...
Hey guys, got lost already... Perhaps I can get some fresh ideas. Cannot get a Aprilia with Piaggio engine to charge. I have tested 2 stators,...
It's 10 years later now. I have the same issue, + I have no one to do it in close countries.. Any portsmaps for 55mm Stroke?
Perhaps someone has the experience. Friend of mine bought a Factory which had carb conversion done, but since the stock version has 2 pin temp...
Hello Marsh! You as an expert! I am running a 172cc typhoon with a standard exhaust. There are so many different opinions one half say any exhaust...
Hey, since the Gasket set would arrive within 2 weeks, could someone measure me the 125-180cc piaggio cylinder head O ring dimeter and thickness?...
Working on my 172cc quad project..:) [ATTACH] [ATTACH]
Thanks Marsh, I do have couple of spare 125cc looms, but basically if the 50cc regulator can handle upto 10 amps then it should work.. 50cc...
So before going for an easy way out and installing a 125cc loom. Trying to find some help!:) Before getting into this, be prepared to FOCUS and...
Opening an old topic, could anybody give me the number of splines in the rear wheel for 125 and what is the approximate diameter..:) Would be...
So after hours in garage and also google. I figured out that after installing LC ignition with a curves of 9d and 22d instead of fixed 19d on...
Has anyone raised the barrel with 1.5mm spacer and then milled 3mm away from the AC cylinder head? Just not to mess around with port timings etc.
Since the stroke would be 3mm longer I understand I would need to put a 1.5mm cylinder spacer and 1.5mm head spacer and then mess with port...
I am wondering is it possible to fit and 55mm crank for an AC engine? After tuning the cases and fitting the crank I would need a spacer for the...
So I got my kit from pm tuning and to be honest with no pictures and anything I have no idea what I part I have to take out and replace with them....
I have the same question, any ideas?:)
Just checking over if i (hope) did put everything back together the right wayon my piaggio 125cc 2 stroke 96'. There is 3 metal washers and 1...
I have a 172cc Typhoon, Malossi cyl, 360deg manifold, 24mm s6 R/T carb, S6 air filter and modified reedblock. But i can't get that thing running....
Well then i dont have that kind of engines:D Cause i mixed up crankshafts.. better one went on my 172cc project and fitted correctly.. Soon i will...
I read something about series one engine have bigger stretch on the crank, and all the cranks won't fit, cause of small spacing or smth.. I have 2...