The UK's biggest automatic scooter forum.
Separate names with a comma.
I know im bumping this a bit. But that end can looks like a Leo Vince ZX.
Yeah, they use Keihin Carbs. http://keihincarbs.com/home.html
Thanks guys :D, Yes ive been using WD40 on the nuts but some of them are badly corroded so they just snap when you try to undo them. I got some...
Hi guys, The other week I went and picked up my new GSXR 400 from a guy in Banbury (Some of you will have seen my thread about Moving a...
1) Yes, because its a ditech you have to change the ECU (or get it reprogrammed) 2) Both those kits are cheap and chinese, if you want a kit that...
Yes the headlights fit, we swapped them over on my mates Katana, Not really worth it though as the lights are still crap. Dont know about the...
If I were you, I would check that oil is acutally getting to the cylinder from the tank, Ive seen this happen a few times now where the oil pump...
IT COULD BE THAT A PISTON RING HAS BROKEN AND SCORED UP THE CYLINDER. (I assume writing only in unreadable Capitals is the new style of forum...
The idle screw might well need adjusting, but that does exactly what its says on the box, adjusts the idling revs. If its bogging out in the top...
Considering the Plug is oily and youre using a lot of fuel, I would say that your carb jet is running rich. If you not happy doing the jetting...
What bike do you have and do you have an aftermarket clutch? I suggest you just buy a set of springs (Like these, but these are for piaggio...
When my exhaust started rusting on the outside I just wire brushed it all off, sanded it down and then painted it with high temperature paint....
Sounds like your clutch springs might be too tight, fit some looser ones and then the clutch should kick in at lower RPM. The tighter the springs...
The carb should be on the opposite side of the cylinder to the exhaust port, it will have two lines going to it, 1 for oil and one for petrol...
Does it come restricted? If so how do I derestrict it? I heard it has a cone in the expansion chamber which I assume is difficult to remove?
Hi guys, Ive got a Derbi GP1 (Same engine as the piaggio Gilera runner) and im looking to fit a sports exhaust. Everything is standard...
Re: Derbi Gp1 doesn't pull away It is loud and does sound like the exhaust is blowing, but at least it pulls away now. I think the exhaust baffle...
Re: Derbi Gp1 doesn't pull away Hi guys, Just thought I would tell you all what the problem was incase anyone else has this problem. I gave up...
Re: Derbi Gp1 doesn't pull away *BUMP* Anyone? Please? Im getting desperate now!
Re: Derbi Gp1 doesn't pull away It felt very good and solid.
